Glo Airtime Transfer Limits and PIN
Every airtime transfer on Glo depends on two things: how much you are allowed to send and the PIN that protects the transfer. If either one is wrong, the transfer fails, and many people give up without knowing which one caused the problem.
This guide explains the limits and the PIN for Glo EasyShare. It shows how the code works, what the PIN does, why a transfer may be refused, and how to avoid the usual mistakes. Limits and fees can change, so check the message on your own screen for the final figures.
How a Glo airtime transfer works
You dial the transfer code, enter the recipient’s number, the amount and your PIN, and Glo moves the credit from your line to theirs. The format is *131*Recipient Number*Amount*PIN#. The recipient must be on Glo.
What the transfer PIN is for
The PIN is your password for sending airtime. It stops someone who picks up your phone from draining your balance. Without the right PIN, no transfer can go through.
Airtime transfer limits explained
Glo sets a smallest and a largest amount you can send in one transfer, and may limit how often you can transfer. Some guides quote a range starting from a small amount of naira and going up to a few thousand, but the figures can change. If your request is refused because of the amount, the message usually says so. Try a smaller amount, or send in two steps.
| Type of limit | What it affects | What to try |
|---|---|---|
| Minimum amount | Very small transfers | Send a slightly larger amount |
| Maximum amount | Large transfers | Split into smaller transfers |
| Balance | Whole transfer | Keep extra credit for any fee |
| Frequency | Many transfers in a short time | Wait and try again |
Do you pay a fee?
Reports differ on whether a fee applies, and the answer may depend on the amount or on current offers. The safe approach is to keep a little credit above the amount you send, then read the confirmation message to see what was taken from your balance.
The PIN rules
- A new line starts with a default PIN, commonly given as 00000.
- You should change the default before your first transfer.
- Use the same format the setup message asks for. Many people use five digits.
- Type the new PIN twice when you change it.
How to change the PIN
| 1 | Dial *132*00000*New PIN*New PIN# with your chosen PIN typed twice. |
| 2 | Press call and wait for the response. |
| 3 | Read the confirmation message. |
| 4 | Test the PIN with a very small transfer to your own second line, if you have one. |
Errors caused by the PIN
Retype slowly. If you changed it before, make sure you are not using the old default.
Set one with the PIN change code before you transfer.
Contact Glo customer care to reset it, and be ready to confirm your details.
Errors caused by limits
Try a smaller number.
Wait a while before you try again.
Top up so you cover both the amount and any fee.
Keeping your PIN safe
- Do not share it, even with friends.
- Avoid your birth year or phone digits.
- Do not save it in your phone’s notes.
- Change it if you suspect someone has seen it.
A short example
Amaka wants to send five hundred naira to her sister. She dials the code, but the reply says the PIN is wrong. She has never changed the default, so she types the change code with the default and her new PIN twice, waits for the confirmation, and then repeats the transfer. This time it works. The amount was never the problem, only the PIN.
How to test your PIN safely
After you set a new PIN, test it with a small transfer to a trusted Glo number, such as a family member’s line. If the transfer succeeds, you know the PIN works and your limits are normal. If it fails, read the message before you try again.
Questions people ask
It is commonly given as 00000. Read the message on your own line to be sure.
Follow the length your line asks for. Many users set five digits.
Limits can apply. If you reach one, the message will say so.
Summary
Set your own PIN, stay within the amount range, keep a little extra credit, and read each message. Those four habits solve almost every transfer problem.